The inspection before start-up includes mechanical filter, mechanical suspension beam, various components connected to the rice milling machine, etc. The detailed inspection contents are as follows: the filter suspension should be flat to ensure the vertical suspension of the boom, the tightness is uniform, and the wire rope is slack; The suspension beam should be stable; free tools, personnel or other objects above the screen body and the transmission steel cavity; the transmission part can be freely rotated, the bearing must be lubricated; check all bolts, screws, nuts are installed and tightened; all machine covers, The machine door and side seals must be tightened in the correct position and in accordance with the regulations; the feed tube is installed to remain relaxed and not to be distorted.
Before the start of the rice mill, it is necessary to check the correct connection of the electrical parts, and use the vibration table to determine the insulation strength to ensure no leakage, safe and reliable. The direction of rotation of the motor should meet the requirements. Bind the rubber and cable and fix it on the inside of the transmission frame with the drive clamp. When connecting the user, check the connection and fixing. The cable is worn from the hole harness to the beam. Connect the fixed cable to the seat according to the installed wire clamp. On the boom below the chair, then secure it along the motor cable until the boom is connected to the power cord.
The cleaning part after use mainly includes four steps of preliminary cleaning and tempering, usually using three screening machines, two washing machines, two waxing machines, one selector, three suction machines, and three magnetic separators. Two water dispensers to reduce the waste content below 0.08%.
The general process of cleaning part is: descaler – gravity dust collector – wheat storage vibrator – magnetic separator – cleaning machine – rotary sieve – gravity dehumidifier – graded automatic dehumidifier – rotary sieve machine – spray water mill .