The sesame seed peeling machine’s main purpose is to soak, peel, and separate the skin and kernel. Its peeling rate can reach 80%-85%. This machine adopts a compound agitator, which can produce axial, radial, and circular flow diversion. So this machine can turn the sesame seed fully without a blind angle.

This black sesame dehuller has a vertical structure. It can make full use of the internal space and has the advantages of small size, simple structure, easy operation, and low maintenance rate.

When sesame as food provides protein resources for humans, it usually needs to be peeled. The peeled sesame has a smoother taste. And it is easier for people to absorb the nutrients of sesame.

The sesame peeler machine is a special device for detaching the inner skin of sesame. It has the advantages of thorough peeling, no damage to sesame seeds, and white and bright sesame seeds. Besides, we have bean peeling machines, which can separate the skin and kernel very well.

Structure and principle of black sesame dehuller

The black sesame dehuller is mainly composed of a reducer, two tanks, a composite stirrer, a separating screen, water adding pipeline, and various inlets and outlets.

• Firstly, soak the sesame seeds in water or hot water with a certain amount of caustic soda. After that, it is poured into the mixing barrel of the sesame seed peeling machine, and the speed reducer drives the mixer to rotate.
• Due to the structural characteristics of the compound stirrer, the materials are circulated up and down, so the sesame and the foaming liquid are mixed evenly and fully. The relative friction between the stirrer and the sesame separates the sesame skin from the kernel.
• Using the retention effect of the separating sieve plate, the sesame skins are separated and discharged, while the sesame kernels are retained, to achieve the purpose of separating the sesame skin kernels.

Working steps of sesame peeler machine

1. Firstly, put the sesame into the machine and stir evenly. Soak for 10-13 minutes, and finally remove and drain.
2. When the sesame seed peeling machine is turned on, add the drained sesame seeds and peel for 3-5 minutes.
3. Add about 1/3 of the water (sesame: water=3:1) to the cleaning bucket to prevent the sesame skin from clogging the mesh. Start the operation, and then open the gate of the peeled bucket, so the sesame enters the cleaning bucket. When the sesame seeds cannot be automatically poured in the later stage, open the water valve to flush out the remaining sesame seeds.
4. Stir in the cleaning bucket for 5-10 minutes, and check that the sesame peel and sesame kernel are separated clearly. Slightly open the bottom drain water valve, and open the water inlet valve in equal amounts to drain the sesame peel with water. Then close the drain valve and open the discharge gate.
5. The kernel rate is 80-85%. The peeled sesame contains about 30% water.

Sesame seeds do not need to be peeled when grinding sauce and squeezing oil, and when used in the food industry should be peeled.

Machine technical parameters

Purpose of peeling sesame

Sesame is not peeled in general oil production, but it is best to peel it when eaten directly. The reason is that the content of fiber and oxalate (2%-3% calcium oxalate chelate) in the seed coat or stratum corneum of sesame seeds is high. So its oil and sesame meal cannot be used as human protein resources and can only be used as feed for cattle.

Wide application of peeled sesame

Peeled sesame has a wide range of applications, mainly in food and catering-related industries. Such as bread, burgers, biscuits, Shaqima, tahini, sesame oil, flour cakes, etc.

Installation and maintenance of sesame seed peeling machine

1. When installing the sesame seed peeling machine for the first time, it must be close to the water source, power source, and good drainage facilities.
2. Turn on the power and check if the equipment is operating normally.
3. The inlet pipe is connected to the water source. If the pressure of the water source is not enough, the water pump needs to be increased.
4. Clean up equipment residues after daily use. Rinse the surface of the separating screen with water. If it is clogged, use a high-pressure water gun to rinse.
5. The reducer should change the oil regularly.

Other applications of sesame cleaning and peeling machine

A sesame seed peeling machine can also be used to peel pumpkin seeds. The principle of pumpkin peeling is the same as that of sesame peeling, and the same machine is used.

It’s just that different people will call different names. Some people will specifically call him a pumpkin seeds dehulling machine. So let’s take a look at how the pumpkin is peeled, and the effect of peeling.

Sesame skin peeling machine sold to Tanzania

One of our customers comes from Tanzania. He operates a sesame processing plant, which sells dehulled sesame seeds to various food processors. He bought the sesame peeler before and wanted to replace the old machines.

According to his capacity need, we suggest 5 sets of the sesame seed peeling machine to work at the same time. Below are the packing and shipping pictures.

If you have any questions or needs about this sesame seed peeling machine, please feel free to contact us. We promise to reply quickly and answer all your questions patiently and are dedicated to providing you with professional support and service. We look forward to cooperating with you!