The operation has two steps: first, break the tip of the fresh flax bar though the feeding hopper, and then pull out from the hopper when the fed part reaches about 15cm from the base part(near the root), and then turnover the flax to strip the base part. Feeding to break and pulling the flax out of the hopper according to rules following：
The quantity of fresh flax stem shall be appropriate for each feeding. The quantity of fresh flax stem number can be measured by flax can be easily grasped in one hand.
Spread bean poles on hand side by side, do not overlap them.
Feeding in at a moderate speed. Feeding speed should be controlled according to the time when the bone and peel of the stem are broken.
Pull out the flaxes slowly, and be as consistent as possible, process the tip of flax slightly slower.
The structure of flax\jute peeling machine:
According to the mechanical characteristics of ramie crop stalks, and on the basis of the domestic and foreign research on flax peeling machine, the design scheme of transverse feeding is adopted, that is, ramie stalks are continuously and uniformly fed into flax device through the clamping device. The continuous processing of ramie can greatly reduce the auxiliary working time and improve the efficiency of flax stripping.
